1 Scope
This standard specifies the basic requirements for basic conditions for trial operation of urban rail transit as well as gauge, civil works, vehicles and vehicle bases, operation equipment system, personnel, operation organization, emergency response and drill, system test and inspection, etc.
This standard is applicable to the identification of the basic condition for trial operation of constructed, renovated and expanded urban rail transit lines.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB 7588 Safety rules for the construction and installation of electric lifts
GB/T 7928 General technical specification for metro vehicles
GB/T 12758 Signal system for urban rail transit General specifications
GB/T 16275 Urban rail transit lighting
GB 16899 Safety rules for the construction and installation of escalators and moving walks
GB/T 20907 Technical requirements for automatic fare collection system of urban rail transportation
GB 50157 Code for design of metro
GB 50382 Code for construction quality acceptance of urban rail transit communication engineering
GB 50490 Technical code of urban rail transit
GB 50578 Code for constructional quality acceptance of urban rail transit signal engineering
GB/T 30012-2013 Regulations for operation management of urban rail transit
3 Terms and definitions
For the purposes of this document, the terms and definitions established in GB/T 30012-2003 as well as the following ones apply.
3.1
urban rail transit
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Basic condition
5 Basic condition for gauge
6 Basic condition for civil works
7 Basic condition for vehicles and vehicle bases
8 Basic condition for operation equipment system
9 Basic condition for personnel
10 Basic condition for operation organization
11 Emergency response and drills
12 System test and inspection
Annex A (Normative) Calculation method of operation index
