GB/T 26536-2011 Bamboo strip
1 Scope
This standard specifies the terms and definitions, technical requirements, inspection methods, inspection rules as well as marking, packaging, storage and transportation of bamboo strips.
This standard is applicable to bamboo laminated lumber, bamboo flooring, bamboo chopping boards and bamboo strips for other purposes.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 17657-1999 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
LY/T 1660 Standard terminology for bamboo-based panel
3 Terms and definitions
For the purposes of this standard, the terms and definitions given in LY/T 1660 as well as the following apply.
3.1
bamboo strip
long strip of bamboo with certain specification and dimension and a basically rectangular cross section through machining after sawing
3.2
rough planed bamboo strip
bamboo strip after rough planing and protective drying
3.3
fine planed bamboo strip
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Technical requirements
6 Inspection methods
7 Inspection rules
8 Packaging, marking, storage and transportation
