1 Scope
This standard specifies the definition, performance requirements and test method of plate and label used on road vehicle for specifying the vehicle information.
This standard is applicable to various plates and labels used on road vehicle for specifying vehicle manufacturing information, warning information and manipulation and indicative information.
This standard is not applicable to the vehicle identification directly formed through engraving, etching, casting, spraying or printing on vehicle or vehicle component body or sewing on component body.
This standard is applicable to the non-information vehicle plate and label.
This standard is not applicable to the identification (can be removes before normal use of vehicle) of vehicle or component used in production, transportation and delivery.
Various plates and labels used for vehicle spare parts and assembly may refer to it.
2 Normative References
The following standards contain provisions which, by reference in this text, constitute provisions of this national standard. For dated reference, subsequent amendments (excluding corrigendum contents) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
GB/T 250-2008 Textiles - Tests for Color Fastness - Gray Scale for Assessing Change in Color (idt ISO 105-A02:1993)
GB/T 3280-2007 "Cold Rolled Stainless Steel Plate Sheet and Strip
GB 8410-2006 Flammability of Automotive Interior Materials
GB/T 13306-1991 Plates
3 Terms and Definitions
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Performance Requirements of Plate and Label
5 Test Method of Plate and Label
