1 Scope
This standard specifies the standard test environment, specimen, test method, test result, test report, etc. for determining the property of resin casting body.
This standard is applicable to the determination of the tension, compression, bending, impact toughness of simply-supported beam, torsion, alkali resistance and refractive index of casting bodies of thermosetting resin used for fiber reinforced plastics and specially used for casting resin.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the normative documents indicated below. For undated references, the latest edition of the normative document applies.
ISO 2602 Statistical Description of Test Results - Calculation of the Mean and Confidence Interval
3 Standard Test Environment
Ambient temperature: (23±2)℃, relative humidity: (50±5)%.
Foreword I
1 Scope
2 Normative References
3 Standard Test Environment
4 Specimens
5 Tests
6 Test Results
7 Test Report
Annex A (Normative) Graphical Method
