Earth-moving machinery - Product identification numbering system
1 Scope
This standard specifies the requirements, content, structure and identification location of a product identification numbering system for earth-moving machinery as defined in GB/T 8498.
It is not applicable to the identification of components or attachments.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest editions apply to this part.
GB/T 8498 Earth-moving machinery - Basic type - Identification and terms and definitions (GB/T 8498-2008, ISO 6165: 2006, IDT)
GB/T 12508 Alphanumeric character sets for optical recognition-Part 2: Character set OCR-B-Shapes and dimensions of the printed image (GB/T 12508-1990, eqv ISO 1073-2: 1976)
3 Terms and definitions
For the purpose of this standard, the following terms and definitions apply.
3.1
product identification number
PIN
unique set of 17 alphanumeric characters assigned to a complete machine by the manufacturer for identification purposes
Note: The PIN consists of four fields as defined in 3.1.1 to 3.1.4.
3.1.1
world manufacturer code
WMC
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Product label/plate
6 Marking
7 PIN character readability
8 Instruction manual reference
Annex A (Normative) WMC listing procedure
Bibliography
