1 Scope
This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of beach umbrella.
This standard is applicable to hand-open beach umbrellas made of different materials of fabric and umbrella stand.
This standard is not applicable to mechanical and electrodynamic beach umbrellas.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 250 Textiles - Tests for Color Fastness - Grey Scale for Assessing Change in Color(GB/T 250-2008, ISO 105-A02: 1993, DT)
GB/T 251 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Staining (GB/T 251-2008, ISO 105-A03: 1993, IDT)
GB/T 1733 Determination of Resistance To Water of Films
GB/T 2828.1 Sampling Procedures for Inspection by Attributea - Part1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (GB/T 2828.1-2003, ISO 2859-1: 1999, IDT)
GB/T 2829 Sampling Procedures and Tables for Periodic Inspection by Attributes (Apply to Inspection of Process Stability)
GB/T 5713 Textiles - Tests for Colour Fastness - Colour Fastness to Water (GB/T 5713-1997, eqv ISO 105-E01: 1994)
GB/T 18830 Textiles-Evaluation for Solar Ultraviolet Radiation Protective Properties
QB/T 3826 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products - Neutral Salt Spraying Test (NSS)
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Requirements
6 Test Method
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
