Motor vehicle speed detector
1 Scope
This standard specifies terms and definitions, technical requirements, test methods, inspection rules, marking, labeling and packaging of motor vehicle speed detector (hereinafter referred to as speed detector).
This standard is applicable to devices that detect the speed of motor vehicles traveling on roads, but it is not applicable to devices that are installed on and measure the speed of motor vehicles.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 2423.1 Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold (GB/T 2423.1-2001; idt IEC 68-2-1: 1990)
GB/T 2423.2 Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat (GB/T 2423.2-2001; idt IEC 68-2-2: 1974)
GB/T 2423.3 Basic environmental testing procedures for electric and electronic products - Test Ca: Damp heat, steady state (GB/T 2423.3-1993; eqv IEC 68-2-3: 1984)
GB/T 2423.5 Environmental testing for electric and electronic products - Part 2: Test methods - Test Ea and guidance: Shock (GB/T 2423.5-1995; idt IEC 68-2-27: 1987)
GB/T 2423.10 Environmental testing for electric and electronic products - Part 2: Test methods - Test Fc and guidance: Vibration (Sinusoidal) (GB/T 2423.10-1995; idt IEC 68-2-6: 1982)
GB/T 2423.37 Basic environmental testing procedures for electric and electronic products - Test L: Dust and sand (GB/T 2423.37-1989; ncq DIN 40046: 1978)
GB/T 2423.38 Basic environmental test procedures for electric and electronic products - Test R: Water test method
GB/T 17626.2 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test (GB/T 17625.2-l998; idt IEC 61000-4-2: 1995)
GB/T 17626.3 Electromagnetic compatibility - Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test (GB/T 17626.3-1998; idt IEC 61000-4-3: 1995)
GB/T 17626.4 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient/burst immunity test (GB/T 17626.4-1998; idt IEC 61000-4-4: 1995)
GB/T 17626.5 Electromagnetic compatibility - Testing and measurement techniques - Surge immunity test (GB/T 17626.5-1999; idt IEC 61000-4-5: 1995)
GB/T 17626.11 Electromagnetic compatibility - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (GB/T 17626.11-1999; idt IEC 6 1000-4-11: 1994)
GA 329.3 Database specification for national traffic management information - Part 3: Database specification for violation information
GA/T 497 General specifications of intelligent monitoring and recording system of vehicles on highways
ISO 7637-2 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
3 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
motor vehicle speed detector
device for detecting the speed of a motor vehicle running on road, including single-function speed detector that only manually detects the speed of the motor vehicle by using the principles of radar and laser speed detect and composite-function speed detector that detects the speed of the motor vehicle by using the principles of radar, laser, loop induction and video analysis speed detect and, at the same time, acquires and processes picture
3.2
radar speed detect
to obtain the running speed of the motor vehicle through calculation based on the measurement of the variation between the emission frequency of radar wave and the frequency of reflected wave
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test method
6 Inspection rules
7 Marking, labeling, inspection certificate and packaging
