1 Scope
This standard specifies the definition, classification, designation, specification, technical requirements, test method, inspection rules, marking, packaging and transportation etc.
This standard is applicable to dip plastic gloves for personal protection.
2 Normative References
The following standards contain provisions which, through reference into this standard, constitute provisions of this standard. At time of publication, the editions indicated are valid. All the standards will be revised; all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of the following standards are applicable.
GB 250-1995 Gray Scale for Assessing Change in Color
GB/T 2828-1987 Sampling Procedures and Tables for Lot-by-lot Inspection by Attributes (Apply to Inspection of Successive Lots or Batches)
GB/T 2829-1987 Sampling Procedures and Tables for Periodic Inspection by Attributes (Apply to Inspection of Stability for Productive Process)
GB 12624-1990 The General Specifications for Protective Gloves and Mittens
GB/T 13022-1991 Plastics - Determination of Tensile Properties of Films
GB/T 16252-1996 Hand Sizing System - Adult
FZ/T 01006-1991 Coated Fabrics - Test Method of the Coating Thickness
FZ/T 01007-1991 Coated Fabrics - Test Method of Resistance to Low Temperature
FZ/T 01008-1991 Coated Fabrics - Test Method of Accelerated Aging by Heat Air
FZ/T 01010-1991 Coated Fabrics - Determination of the Coating Adhesion Strength
FZ/T 01011-1991 Coated Fabrics - Determination of Abrasion Resistance
3 Definitions
Foreword i
1 Scope
2 Normative References
3 Definition
4 Classification and Designation
5 Specification
6 Technical Requirements
7 Test Method
8 Inspection Rules
9 Marking, Packaging, Transportation and Storage
