1 Scope
This standard specifies the materials, process specifications, coating performance requirements and test methods for anti-corrosive painting of fusion bonded epoxy coating powders applied on metallic material like steel.
This standard is not applicable to decorative painting.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative documents applies.
GB/T 1034 Plastics - Determination of Water Absorption (GB/T 1034-2008, ISO 62: 2008, IDT)
GB/T 1408.1 Insulating Materials -Test Methods for Electric Strength-Part 1: Test at Power Frequencies (GB/T 1408.1-2006, IEC 60243-1: 1988, IDT)
GB/T 1410 Methods of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials (GB/T 1410-2006, IEC 60093: 1980, IDT)
GB/T 1768 Method of Test for Abrasion Resistance of Paint Films (GB/T 1768-2006, ISO 7784: 1997, IDT)
GB/T 1771 Paints and Varnishes - Determination of Resistance to Neutral Salt Spray (Fog) (GB/T 1771-2007, ISO 7253: 1996, IDT)
GB/T 4472 General Rule for Determination of Density and Relative Density for Chemical Products
GB 5749 Standards for Drinking Water Quality
GB/T 6329 Adhesives-Determination of Tensile Strength of Butt Joints (GB/T 6329-1996, eqv ISO 6922: 1987)
GB/T 6554 Resin Based Reactive Compounds Used for Electrical Insulation - Part 2: Methods of Test - Methods for Coating Powders for Electrical Purposes (GB/T 6554-2003, IEC 60455-2-2: 1984, MOD)
GB 7692 Safety Code for Painting - Safety, Ventilation and Air Clean-up for Pretreatment Process of Painting
GB/T 8923 Rust Grades and Preparation Grades of Steel Surfaces before Application of Paints and Related Products (GB/T 8923-1988, eqv ISO 8501-1:1988)
GB 9686 Hygienic Standard for Polyamide Epoxy Resin used as Internal Coating of Food Container
GB 50152 Standard for Test Method of Concrete Structures
GBJ 87 Specifications for the Design of Noise Control System in Industrial Enterprises
GBZ 1 Hygienic Standards for the Design of Industrial Enterprises
ISO 14654:1999 Epoxy-coated Steel for the Reinforcement of Concrete
JB/T 6570 Conventional Abrasive-Testing Method for Magnetic Material
JG/T 3042-1997 Epoxy Resin Coated Steel Bars
SY/T 0315-2005 Technological Standard of External Fusion Bonded Epoxy Coating for Steel Pipeline
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Data and Requirements Ought to be Provided by Demander
5 Coating Classification
6 Materials
7 Process Specification
8 Repair of Fusion Bonded Epoxy Coatings
9 Performance Requirement and Test Method for Fusion Bonded Epoxy Coatings
10 Inspection Rules
11 Identification, Shipping and Storage of Finished Product
12 Safety, Health and Environmental Protection of Coating Production.
13 Handover Document
Annex A (Normative) Designated Medium and Condition in Coating Chemical Resistance Test
