1 Scope
This standard, together with GB/T 18487.1, gives specific requirements (maximum AC voltage of 660V and maximum DC voltage of 1,000V in accordance with GB 156-1993) for conductive connection to A.C./D.C. electric vehicle charging station.
For A.C. charging station, this standard does not cover box type assemblies with socket-outlets, installed for the purpose of delivering energy to the vehicle, which have no charging control functions.
According to GB/T 18487.1, the charging mode of D.C. electric vehicle charging station shall be Mode 4.
This standard does not cover all other safety aspects related to maintenance.
2 Normative References
The involved provisions in the following standards will become the provisions through reference in this standard. When published, all the shown versions are valid. All the standards will be revised, and all parties using this standard shall discuss the possibility of using the latest version.
Contents
Foreword i
IEC Foreword ii
1 Scope
2 Normative References
3 Definition
4 General
5 Standard Conditions for Operation in Service and for Installation
6 Rating of AC Input and DC Output Voltages and Current
7 General Test Requirements
8 Functions and Requirements
9 Electrical Safety
10 Dielectric Insulation Test
11 Environmental Tests
12 Specific Connector Requirements
13 Communication between EV and D.C. Charging Station
14 Classification
15 Marking and Instructions
Appendix A (Informative) Other Requirements of Charger (Station)
Appendix B (Informative) Reference Standard
