1 Scope
This part of GB/T 17737 specifies the general requirements, the definitions and the requirements for the design and test methods of coaxial communication cables.
This part is applicable to radio communication equipment and coaxial communication cables used for electronic device adopting similar technology.
2 Normative References
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
GB/T 2421.1-2008 Environmental Testing - General and Guidance (IEC 60068-1: 1988, IDT)
GB/T 2951.12-2008 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables - Part 12: Methods for General Application - Thermal Ageing Methods (IEC 60811-1-2: 1985, IDT)
GB/T17650.1-1998 Test on Gases Evolved During Combustion of Materials From Cables - Part 1: Determination of the Amount of Halogen Acid Gas (IEC 60754-1: 1994, IDT)
GB/T 17650.2-1998 Test on Gases Evolved During Combustion of Materials from Cables - Part 2: Determination of Degree of Acidity of Gases by Measuring pH and Conductivity (IEC 60754-2: 1991, IDT)
GB/T 18380 (All Parts) Tests on Electric and Optical Fiber Cables under Fire Conditions [IEC 60332 (all parts)]
IEC 60028: 1925 International Standard of Resistance for Copper
IEC 60068-2-20: 1979 Amendment 2 - Environmental Testing - Part 2: Tests - Test T: Soldering
IEC 60811-1-1 Insulating and Sheathing Materials of Electric and Optical Cables - Common Test Methods - Part 1-1: Methods for General Application - Measurement of Thickness and Overall Dimensions - Tests for Determining the Mechanical Properties
IEC 60811-4-1 Insulating and Sheathing Materials of Electric and Optical Cables - Common Test Methods - Part 4-1: Methods Specific to Polyethylene and Polypropylene Compounds-Resistance to Environmental Stress Cracking-Measurement of the Melt Flow Index-Carbon Black and/or Mineral Filler Content Measurement in Polyethylene by Direct Combustion-Measurement of Carbon Black Content by Thermogravimetric Analysis (TGA) - Assessment of Carbon Black Dispersion in Polyethylene Using a Microscope
IEC 61196-1(All Parts) Coaxial Communication Cables
IEC 62153(All Parts) Metallic Communication Cable Test Methods
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1
dielectric types
3.1.1
airspaced dielectric cables
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Materials and Cable Construction
5 Ratings and Characteristics
6 Identification, Marking and Labelling
7 Tests and Test Methods
8 Quality
9 Delivery and Storage
Annex NA (Informative) Designation for Cable Models
