1 Scope
This part of GB/T 13871 gives lip seal users guidance on the careful storage, handling and proper installation of rotary shaft lip-type seals incorporating elastomeric sealing elements; attention is drawn to the hazards involved and ways of avoiding them are pointed out.
This part is applicable to rotary shaft lip-type seals incorporating elastomeric sealing elements (hereafter referred as seals).
Note: GB/T 13871 and GB/T 21283 are complementary; GB/T 21283 specifies the thermoplastic seals.
2 Normative References
The following normative documents contain provisions which, through reference in this part of GB/T 13871, constitute provisions of this part. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties whose enter into agreement according to this Part are encouraged to research whether the latest editions of these references are applied or not. For undated references, the latest edition of the normative document applies.
GB/T 5719 Rubber Sealing Articles - Vocabulary
GB/T 13871.1 Rotary Shaft Lip Type Seals Incorporating Elastomeric Sealing Elements - Part 1: Nominal Dimensions and Tolerances (GB/T 13871.1-2007, ISO 6194-1:1982, MOD)
GB/T 17446 Fluid Power Systems and Components - Vocabulary (GB/T 17446-1998, idt ISO 5598:1985)
3 Terms and Definitions
The terms and definitions specified in 2.3 of GB/T 5719 and GB/T 17446 are applicable to this part of GB/T 13871.
4 Storage
1 Scope
2 Normative References
3 Terms and Definitions
4 Storage
5 Packaging
6 Handling of Loose Parts
7 Seal Installation
8 Identification Statement
