Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is a revision of and supersedes "General Specification of Analytical Instruments" (GB/T 12519-1990).
Compared with the original standard, this standard has the following main changes in technical content:
- For all the quoted standards, the latest editions referred to applied;
- Terms were added;
- The instrument model and class designation were added;
- Requirements of the instrument function were added;
- Requirements of the electromagnetic compatibility (EMC) for instrument were added;
- Requirements of the instrument interface, compatibility and interaction were added;
- The instrument safety requirements and test method were modified;
- The original Appendix A was deleted and the current Appendix A was added.
The Appendix A of this standard is informative.
This standard was proposed by the China Machinery Industry Federation.
This standard is under the jurisdiction of the National Technical Committee on Industrial Process Measurement and Control (SAC/TC 124) of Standardization Administration of China.
Drafting organizations of this standard: Beijing Analytical Instrument Institute, Shanghai Precision & Scientific Instrument Co., Ltd., Shanghai Lengguang Technology Co., Ltd., Beijing Ruili Analytical Instrument Company, Foshan Analytical Instrument Co., Ltd, Chongqing Chuanyi Analytical Instrument Co., Ltd., Nanjing Analytical Instrument Factory Co., Ltd., Dalian Elite Analytical Instrument Co, Ltd., Shanghai Institute of Measurement and Testing Technology and Beijing Institute of Metrology.
Chief drafting staff of this standard: Ma Yajuan, Yin Chuanxin, Qian Guangbei, Wang Jingfeng, Li Peisheng, Hu Tibao, Xu Huaiming, Zhang Xueyun, Zhang Min and Shen Zhengsheng.
The previous edition of the standard superseded by this standard is as:
- GB/T 12519-1990.
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
中华人民共和国国家标准
GB/T 12519-2010
Supersedes GB/T 12519-1990
General Specification of Analytical Instruments
分析仪器通用技术条件
1. Scope
This standard specifies the requirements, test methods, inspection rules, marking, packaging, transport and storage for analytical instrument.
This standard is applicable to all types of analytical instruments (hereinafter referred to as instrument).
This standard is also applicable to the devices attached to instrument or the devices formed into independent products for sample treatment, preparation, signal processing and transmission and auxiliary analysis.
2. Normative References
The following clauses quoted by this standard become the constituent parts of this standard. For dated reference, subsequent amendments to (excluding the correction contents) or revisions of do not applicable to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 191-2008 Packaging-Pictorial Marking for Handling of Goods (ISO 780: 1997, MOD)
GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributes Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO 2859-1: 1999, IDT)
GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Apply to Inspection of Process Stability)
GB 4793.1-2007 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use-Part 1: General Requirements (IEC 61010-1: 2001, IDT)
GB/T 6592-1996 Expression of the Performance of Electrical and Electronic Measuring Equipment (idt IEC 60359: 1987)
GB/T 11606-2007 Methods of Environmental Test for Analytical Instruments
GB/T 13384-2008 General Specifications for Packing of Mechanical and Electrical Product
GB/T 135966 Analytical Instrument-Vocabulary
GB/T 18403.1-2001 Expression of Performance of Gas Analyzers-Part 1:General (eqv IEC 61207-1: 1994)
GB/T 20245.1-2006 Expression of Performance of Electrochemical Analyzers Part1: General (IEC: 60746-1: 2003, IDT)
JB/T 6241 Analytical Instrument-Method for Product Classification, Designation and Model Codification
3. Terms
For the purposes of this standard, the terms and definitions given in GB/T 13966 and the following apply.
3.1
Quality property
A description of the technical status of the instrument, which generally is composed of function, technical parameter and performance characteristic.
3.2
Technical parameter
A description of the main characteristics of the instrument, such as the measurement object, measurement range, minimum detectable quantity, input quantity, output quantity, etc. of the instrument.
Where quantitative assessment is required for a technical parameter of the instrument, the parameter is the performance characteristic.
3.3
Performance characteristic
A quantitative description of the service performance of the instrument and the quantitative assessment criteria during the instrument inspection and acceptance, e.g. the sensitivity, accuracy, repeatability and stability of the instrument. In the technical standards of the instrument, each performance characteristic shall have its corresponding test method.
3.4
Function
A description of the pathway and mode in which the instrument achieves the required performance characteristic, e.g. the operating software, calibration mode, data processing method, alarm mode and signal transmission form of the instrument.
Where quantitative assessment is required for a function of the instrument, such function is the performance characteristic.
3.5
Product standard
A document used for fixing the product technical state. It is the basis for the manufacture, inspection, and assessment of the product. The object of product standard may be a product or a class of product.
4. Instrument Classification and Model Designation
See JB/T 6241.
5. Requirements
5.1 Working conditions of the instrument
The working conditions of the instrument include the reference working condition, normal working condition and extreme working condition.
The service conditions are as follows:
a) According to the design service conditions of the instrument and by reference to the ambient condition given in Table 1 of GB/T 11606-2007, select all the quantities that will have non-ignorable influence on the instrument quality characteristics, and the reference values or reference ranges as the normal working condition. Where the requirements of GB/T 11606-2007 are not completely met, the difference from the requirements shall be indicated in the document;
b) Where the assessment on some quality characteristics of the instrument needs to exclude the influence of environmental factors, a reference working condition shall be given (see Table 2 of GB/T 11606-2007);
c) Where necessary, an extreme working condition shall be given.
5.2 Appearance
The instrument appearance shall meet the following requirements:
a) The instrument appearance shall be in order and clean, and its surface coating and plating shall be free from obvious stripping, scratch, visible base and stain;
b) All the nameplates and marks shall be durable and clear and their contents shall meet the requirements of relevant laws, regulations and standards;
c) No fasteners shall get loose and all the regulating parts shall be flexible and function normally;
d) The parts surfaces shall not be rusted;
c) The removable parts of the instrument shall be able to be disassembled and assembled without problems.
Foreword i
1. Scope
2. Normative References
3. Terms
4. Instrument Classification and Model Designation
5. Requirements
6. Test Methods
7. Inspection Rule
8. Marking, Packaging, Transportation and Storage
9. Quality Warranty
Appendix A (Informative) Determination of Voltage Value in Dielectric Strength Test
