Sintered metal friction materials - Determination of density
1 Scope
This standard specifies a method to determine the density of sintered metal friction materials.
This standard is applicable to the determination of density of friction materials without the core veneer.
2 Normative references
The following standards contain provision which, through reference in this standard, constitute provisions of this standard. At the time of publication, all editions cited are valid. All standards are subject to revision, and all parties using this standard are encouraged to investigate the possibility of applying the latest editions of the following standards.
GB/T 3141-1994 Industrial liquid lubricants - ISO viscosity classification (eqv ISO 3448:1992)
GB/T 5163-1985 Permeable sintered metal materials - Determination of density (eqv ISO 2738:1987)
GB/T 5165-1985 Permeable sintered metal materials - Determination of oil content (eqv ISO 2737:1973)
3 Specimen
3.1 For parts with different friction layer thickness, prepare the specimen according to the following methods:
Foreword I
1 Scope
2 Normative references
3 Specimen
4 Test procedures
5 Test results
6 Test report
