1.0.1 This code is formulated with a view to intensify to quality control of the construction engineering, unify the inspection and acceptance of the construction quality of masonry engineering and to guarantee the quality of the whole engineering.
1.0.2 This code is applicable for the construction quality control and acceptance of the bricks, stones, concrete small-size hollow bricks, and evaporized and pressurized concrete bricks.
1.0.3 This code is accomplished with the national standard Unified Code for acceptance of construction quality of construction engineering GB50300-2001.
1.0.4 The requirement of the construction quality specified in the technical documents and contracts should not be lower than the provisions of this code.
1.0.5 The acceptance requirement of the masonry engineering should be compliant to not only the provisions of this code, but also the provisions of other current national standards.
1. General principles………………………………………..…………….……….
2. Terms……………………………………………………………………………
3. Basic regulations………………………………………………………….…….
4. The mortar in the masonry construction………………………………….……
5. The engineering of the brick masonry…………………………………………
5.1 General regulations
5.2 The master items
5.3 The common items
6. The masonry engineering of the concrete small size hollow bricks…………...
6.1 General regulations
6.2 The master items
6.3 The common items
7. The masonry engineering of the stones……………………………….……….
7.1 General regulations
7.2 The master items
7.3 The common items
8. The masonry engineering of the reinforced masonry…………………………
8.1 General regulations
8.2 The master items
8.3 The common items
9. The masonry engineering of the filling in walls………………………………
9.1 General regulations
9.2 The master items
9.3 The common items
10. Construction in winter…………………………………………………………
11. The construction inspection and acceptance on the sub-engineering……..….
Appendix A The quality acceptance recorder of the masonry engineering inspected batch……………………………………………………………………………….
Appendix B The explain of the words in this inspection………………………
