1.0.1 This code is formulated with a view to specify the engineering design of industrial television system, improve production efficiency and control level, find and potential industrial accident in time and ensure the safety of persons and equipments.
1.0.2 This code is applicable to the engineering design of the new-build, rebuild and extended industrial television system. For the rebuild and extension engineering project, existing resources shall be used efficiently and practically.
1.03 Engineering design of industrial television system shall meet the requirements of production and management, specified products which meet the requirements of current national standard shall be adopted, realize safety and usability, state-of-art technology and economic feasibility.
1.0.4 This code specifies basic requirements on engineering design of industrial television system, if this code collides with national laws and administrative laws, the later shall be complied with.
1.0.5 For the engineering design of industrial television system, not only the requirements stipulated in this code, but also those in the current relevant ones of the nation shall be complied with.
1 General Provisions
2 Terms
3 System Design
4 Equipment Selection
4.1 Camera, Lens and Pan-unit
4.2 Camera Protection
4.3 Auxiliary Lighting
4.4 Visualization and Control Equipment
5 Equipment Layout
5.1 Camera
5.2 Visualization and Control Equipment
6 Monitoring Room
7 Transmission and Cable/Conduit Laying
8 Power Supply, Grounding and Lightning Protection
8.1 Power Supply
8.2 Grounding and Lightning Protection
Explanation of Wording in This Code
List of Quoted Standards
