1 Scope
This standard specifies the structure of the table of excepted quantities of dangerous goods, the excepted quantities of dangerous goods and the general requirements, packaging, packages test, mark, documents, exemptions and other contents of dangerous goods transported in excepted quantities.
This standard is applicable to dangerous goods packed and transported in excepted quantities.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 4122.1 Packaging terms: Part 1: Basic
GB 6944 Classification and code of dangerous goods
GB 12268 List of dangerous goods
UN Recommendations on the transport of dangerous goods: Model regulations (sixteenth revised edition)
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in GB/T 4122.1, GB 6944, GB 12268 and UN Recommendations on the transport of dangerous goods: Model regulations (sixteenth revised edition) (hereinafter referred to as Model regulations) apply.
4 General requirements
4.1 The dangerous goods applicable to be transported by excepted quantities are indicated by E1~E5, and the meanings of E1~E5 are shown in Table 1 and listed in the column of "excepted quantity" in Clause 6.
Table 1 Meaning of excepted quantities code E1~E5
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Structure of the table of excepted quantities of dangerous goods
6 Table of excepted quantities of dangerous goods
7 Packaging
8 Packages test
9 Marks and documents
10 Exemptions
Figure 1 Excepted quantities mark
Table 1 Meaning of excepted quantities code E1~E
Table 2 Excepted quantities of dangerous goods
