1 Scope
This standard specifies specifications, test methods and sampling principles for safeguard of amusement rides.
This standard is applicable to safeguard of amusement rides, such as overspeed limiting devices, stop devices, emergency brake gears, hold-back devices, safety belts, safety bars and cushioning devices.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2423.1 Environmental testing — Part 2: Test methods — Tests A: Cold
GB/T 2423.2 Environmental testing — Part 2: Test methods — Tests B: Dry heat
GB/T 2423.3 Environmental testing for electric and electronic products — Part 2: Testing method test Cab: Damp heat Steady state
GB/T 2423.37 Environmental testing for electric and electronic products — Part 2: Test methods — Test L: Dust and sand
GB/T 2423.38 Environmental testing for electric and electronic products — Part 2: Test methods — Test R: Water test method and guidance
GB 4208 Degrees of protection provided by enclosure(IP code)
GB 5226.1 Electrical safety of machinery — Electrical equipment of machines — Part 1: General requirements
GB 8408-2008 Amusement device safety code
GB 14166-2003 Safety belts and restraint systems for adult occupants of motor vehicles
GB/T 20051-2006 Specifications of no power type of amusement devices
GB/T 20438.2 Functional safety of electrical/electronic/programmable electronic safety-related systems ― Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
3 Terms and Definitions
For the purpose of this document, the following terms and definitions apply.
3.1
Safeguard
Protective devices or protective facilities used with the safety function to protect people be safe from present or proximate hazards.
