1 Scope
This standard specifies safety requirements and measures which the shot (air) blast equipment design personnel, the manufacturer, the supplier and the user shall comply with.
This standard is applicable to all kinds of shot (air) blast equipment for shot (air) blasting of workpiece surface and those for joint processing of air blast and shot (air) blast (hereinafter referred to as equipment).
This standard is also applicable to all the units and auxiliary equipment that account for shot (air) blast equipment group.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding amending error in the text) to, or revisions of, any of these publications do not be applied. However, the parties whose enter into agreement according to these specifications are encouraged to research whether the latest editions of these references are applied or not. For undated references, the latest edition of the normative document is applicable to this standard.
GB 150 Steel Pressure Vessels
GB 2893 Safety Colors (GB 2893-2008, ISO 3864-1:2002, MOD)
GB/T 3766 Hydraulic Fluid Power - General Rules Relating to Systems (GB/T 3766-2001, eqv ISO 4413: 1998)
GB 5083 General rules for designing the production facilities in accordance with safety and health requirements
GB 5226.1 Safety of Machinery - Electrical Equipment of Machines - Part 1: General Requirements (GB 5226.1- 2002, IEC 60204-1: 2000, IDT)
GB/T 7932 Pneumatic fluid power - General Rules Relating to Systems (GB/T, 7932-2003, ISO 4414: 1998, IDT)
GB/T 9969 General Principles for Preparation of Instructions for Use of Industrial Products
GB 12265.1 Safety of Machinery - Safety Distances to Prevent Danger Zones Being Reached by the Upper Limbs (GB 12265.1-1997, eqv EN 294: 1992)
GB 12265.3 Safety of Machinery - Minimum Gaps to Avoid Crushing of Parts of the Human Body (GB 12265.3-1997, eqv EN 349: 1993)
GB/T 14776 Ergonomics - Principles for Determining Dimensions of Work Places in Manufacturing Areas and the Dimensions
GB/T 15706.1-1995 Safety of Machinery - Basic Concept, General Principles for Design - Part 1: Basic Terminology, Methodology (GB/T, 15706.1-2007, ISO 12100-1: 2003, IDT)
GB/T 15706.2-2007 Safety of Machinery - Basic Concepts, General Principles for Design - Part 2: Technical Principles (ISO 12100-2: 2003, IDT)
GB/T 16251 Ergonomic Principles in the Design of Work Systems (GB/T, 16251-2008, ISO 6385: 2004, IDT)
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Major Hazard Items
5 Safety Requirements and/or Measures
6 Judgment for Safety Requirements and/or Measures
7 Information for Use
