1 Scope
This standard specifies the classification, requirements, test methods, inspection rules, and marking, packaging, transportation and storage of silicone sealants for structurally glazed insulating glass units (hereinafter referred to as "structural silicone sealants for insulating glass").
This standard is applicable to the secondary edge silicone sealants for structurally glazed insulating glass units.
This standard is not applicable to silicone structural sealants for bonding and assembling of building curtain wall structure.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document applies.
GB/T 531.1-2008 Rubber Vulcanized or Thermoplastic - Determination of Indentation Hardness - Part 1: Duromerer Method (Shore Hardness) (ISO 7619:1986, IDT)
GB/T 13477.1-2002 Test Method for Building Sealants - Part 1: Specifications for Test Substrates (ISO 13640:1999, MOD)
GB/T 13477.5-2002 Test Method for Building Sealants - Part 5: Determination for Tack-free Time
GB/T 13477.6-2002 Test Method for Building Sealants - Part 6: Determination of Flow (ISO 7390:1987, MOD)
GB/T 13477.10-2002 Test Method for Building Sealants - Part 10: Determination of Tensile Properties at Maintained Extension (ISO 8340:1984, MOD)
GB 16776-2005 Structural Silicon Sealants for Building
GB/T 22083-2008 Classification and Requirements for Building Sealants (ISO 11600:2002, MOD)
JC/T 485-2007 Glazing Elastic Sealants for Building
Foreword I
1 Scope
2 Normative References
3 Classification
4 Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage
Annex A (Normative) Compatibility between Structural Silicone Sealants for Insulating Glass and Their Contact Materials
