1 Scope
This clause of GB 2099.1 is applicable except as follows.
Addition:
This part of GB 2099 applies to fused plugs, where the fuses are primarily intended to protect the flexible cable or cord.
These fuses are not intended to protect appliances or parts of them against overload.
There is a NOTE here in IEC 60884-2-1:2006. 1）
2 Normative references
The following documents contain provisions which, through reference in this part of GB 2099, constitute provisions of this part. For dated reference, subsequent amendments to (excluding correction contents), any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document is applicable to this part.
The second clause of GB 2099.1 is applicable except as follows.
Contents
Foreword
IEC Foreword
1 Scope
2 Normative references
3 Terms and Definitions
4 General requirements
5 General notes on tests
6 Ratings
7 Classification
8 Marking
9 Checking of dimensions
10 Protection against electric shock
11 Provision for earthing
12 Terminals and terminations
13 Construction of fixed socket-outlets
14 Construction of plugs and portable socket-outlets
15 Interlocked socket-outlets
16 Resistance to ageing, protection provided by enclosures, and resistance to humidity
17 Insulation resistance and electric strength
18 Operation of earthing contacts
19 Temperature rise
20 Breaking capacity
21 Normal operation
22 Force necessary to withdraw the plug
23 Flexible cables and their connection
24 Mechanical strength
25 Resistance to heat
26 Screws, current-carrying parts and connections
27 Creepage distances, clearances and distances through sealing compound
28 Resistance of insulating material to abnormal heat, to fire and to tracking
29 Resistance to rusting
30 Additional tests on pins provided with insulating sleeves
