1 Scope
This standard specifies the technical requirements, test methods and marking of the rubber industrial boots with chemical resistance.
This standard is applicable to the quality evaluation on rubber boots worn in operations with acid, alkali and relevant chemicals.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 528-1998 Rubber, Vulcanized or Thermoplastic-Determination of Tensile Stress-Strain Properties (eqv ISO 37: 1994)
GB/T 1690 Rubber, Vulcanized - Determination of the Effect of Liquids (neq ISO 1817)
GB/T 3512-2001 Rubber, Vulcanized or Thermoplastic-Accelerated Ageing and Heat Resistance Tests-Air-oven Method (eqv ISO 188: 1998)
GB/T 5723-1993 Rubber, Vulcanized or Thermoplastic - Determination of Dimensions of Test Pieces and Products for Test Purposes (eqv ISO 4648: 1991)
GB/T 6031-1998 Rubber, Vulcanized or Thermoplastic - Determination of Hardness (Hardness Between 10 IRHD and 100 IRHD) (idt ISO 48: 1994)
GB/T 7759-1996 Rubber, Vulcanized or Thermoplastic-Determination of Compression Set at Ambient, Elevated or Low Temperatures" (eqv ISO 815: 1991)
GB/T 9867 Rubber - Determination of Abrasion Resistance Using a Rotating Cylinderical Drum Device (neq ISO 4649)
HG/T 3664-2000 Test Method for the Resistance of All Rubber Boots (Shoes) to Water Penetration
Foreword II
1 Scope
2 Normative References
3 Technical Requirements
4 Test Methods
5 Marking
Bibliography
