1 Scope
This standard specifies the technical requirements, test methods and marking of the moulded plastics industrial boots with chemical resistance.
This standard is applicable to the quality evaluation on plastics boots and rubber/plastic boots worn in productions with acid, alkali or relevant chemicals.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents apply. For undated references, the latest edition of the referenced document is applicable to this standard.
GB/T 528-1998 Rubber, Vulcanized or Thermoplastic - Determination of Tensile Stress-Strain Properties (eqv ISO 37: 1994)
GB/T 1690 Rubber, Vulcanized - Determination of the Effect of Liquids (neq ISO 1817)
GB/T 5723-1993 Rubber, Vulcanized or Thermoplastic - Determination of Dimensions of Test Pieces and Products for Test Purposes (eqv ISO 4648: 1991)
GB/T 6031-1998 Rubber, Vulcanized or Thermoplastic - Determination of Hardness (Hardness Between 10 IRHD and 100 IRHD) (idt JSO 48: 1994)
GB/T 9867 Rubber - Determination of Abrasion Resistance Using a Rotating Cylinderical Drum Device (neq ISO 4649)
Contents
Foreword I
1 Scope
2 Normative References
3 Technical Requirements
4 Test Methods
5 Marking
Bibliography
