1 Scope
This standard specifies classification and construction requirements of karting circuit.
This standard applies to design, appraisal inspection and homologation inspection of karting circuit.
2 Normative References
The provisions of the following documents, through reference in this text, constitute the provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition referred to apply.
GB 19196 Kart Classification & Homologation
3 Terms and Definitions
For the purpose of this standard, the following terms and definition apply.
3.1
karting circuit
the special places used for karting racing, karting training and karting popularity and equipped with enclosed annular track and corresponding facilities
3.2
track
the enclosed annular road specially constructed for karting with starting and ending points at the same place
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification of Karting Circuit
5 Circuit Requirements
6 Quality Inspection of Karting Circuit
Annex A (Informative) Boundary Stone of Track
Annex B (Informative) Standard Layout and Area of Enclosed Area in Outdoor Racing Karting Circuit
Annex C (Normative) Shape and Theoretical Area Calculation of Curve Buffer Area in Outdoor Karting Circuit
Annex D (Normative) Connection Method of Tyre during Construction of Tyre Wall
