1 Scope
This standard specifies the rating criteria and limited values of energy efficiency, evaluating values of energy conservation, test methods and inspection rules for the self-ballasted fluorescent lamps for general lighting service (hereinafter referred to as "self-ballasted fluorescent lamps").
This standard applies to those self-ballasted fluorescent lamps with such features: rated voltage: 220V; AC supply with frequency of 50Hz; nominal power: 60W and bellow, adopting of screw holder or bayonet holder, for general lighting service at household or other similar occasions; an integration of starting control parts and burning point stabilization parts.
This standard does not apply to the self-ballasted fluorescent lamps with covers.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
Contents
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
4.1 Basic Requirements
4.2 Rating Criteria of Energy Efficiency and Lumen Maintenance
4.3 Limited Values of Energy Efficiency and Lumen Maintenance
4.4 Evaluating Values of Energy Conservation and Lumen Maintenance
5 Test Methods
5.1 General Requirements of Test
5.2 Initial Luminous Efficacy
5.3 Chromaticity Coordinate
5.4 Lumen Maintenance
6 Inspection Rules
6.1 Acceptance Test
6.2 Routine Test
