1 Scope
This standard specifies classification, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of burglary resistant safes.
This standard is applicable to production and inspection of burglary resistant safes, and also applicable to burglary resistant safes with alarm, fire protection and remote control functions.
2 Normative References
The following standards contained provisions which, through reference in this standard, constitute provisions of this standard. At the time of publication, all editions indicated are valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the following standards.
GB/T 1720-1979 Method of Test for Adhesion of Paint Films
GB/T 6461-1986 Metallic Coatings - Coatings Cathodic to the Substrate - Rating of Electro-plated Test Specimens Subjected to Corrosion Tests (eqv ISO 4540: 1980)
GB/T 10125-1997 Corrosion Tests in Artificial Atmospheres - Salt Spray Tests (eqv ISO 9227: 1990)
GB/T 12335-1990 Metallic Coatings - Coatings Anodic to the Substrate - Rating of Test Specimens Subjected to Corrosion
GB/T 15211-1994 Environmental Testing for Alarm Systems
GB/T 15482-1995 Single Sampling Procedures and Tables for Product Quality Audit of Small Population by Attributes
GB/T 17626.2-1998 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test (idt IEC 61000-4-2: 1995)
GB/T 17626.3-1998 Electromagnetic Compatibility - Testing and Measurement Techniques - Radiated Radio-frequency Electromagnetic Field Immunity Test (idt IEC 61000-4-3: 1995)
GB/T 17626.4-1998 Electromagnetic Compatibility - Testing and Measurement Techniques - Electrical Fast Transient/Burst Immunity Test (idt IEC 61000-4-4: 1995)
GB/T 17626.5-1999 Electromagetic Compatibility-Testing and Measurement Techniques-Surge (Impact) Immunity Test (idt IEC 61000-4-5: 1995)
GB/T 17626.11-1999 Electromagnetic Compatibility-Testing and Measurement Techniques-Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests (idt IEC 61000-4-11: 1995)
GA/T 73-1994 Burglary Resistant Machine Locks
3 Definitions
Foreword i
1 Scope
2 Normative References
3 Definitions
4 Product Classification and Labeling
5 Technical Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
