1 Scope
This standard specifies product naming, technical requirements, test methods, inspection rules, packaging, transport and storage of bomb suppression blanket.
This standard is applicable to bomb suppression blanket.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 3917.3-1997 Textiles - Tear Properties Fabrics - Part 3: Determination of Tear Force of Trapezoidal Shaped Test Specimens
GB/T 3923.1-1997 Textiles - Ensile Properties of Fabrics - Part 1: Determination of Breaking Force and Elongation at Breaking Force - Strip Method
GB/T 6544-1999 Packing Material - Corrugated Fibreboard
GB 6722-2003 Safety regulations for Blasting
FZ/T 01004-1991 Coated Fabrics - Test Method for Resistance to Penetration by Water (Hydrostatic Pressure Test)
3 Terms and Definitions
For the purpose of this standard, the following terminologies and definitions apply.
3.1
bomb suppression blanket
temporary protective device, generally composed of blanket and fence, which is made of soft materials that can effectively reduce shock wave generated during explosion of explosives and injury caused by fragment to human and objects.
3.2
fragment
solid killing and wounding objects formed or released after explosion of explosives, such as metal blocks, wood chips, soil blocks, stones, etc.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Naming
5 Technical Requirements
6 Test Methods
7 Inspection Rules
8 Packaging, Transport and Storage
Annex A (Normative) Technical Requirements of Corrugated Board
