1 Scope
This Standard specifies the terms and definitions, requirements, sampling, test methods, inspection rules, marks and package of blanket products.
This Standard is applicable to various machine knitting blanket products which take the cellulosic fibers and the synthetic fibers as the main raw materials.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB 250 Gray Scale for Assessing Change in Color (idt ISO 105-A02)
GB/T 2910 Textile-Binary Fibre Mixtures-Quantitative Chemical Analysis (Eqv ISO 1833)
GB/T 2911 Textiles-Ternary Fibre Mixtures-Quantitative Analysis (Eqv ISO 5088)
GB/T 3923.1 Textiles-Tensile Properties of Fabrics-Part 1: Determination of Breaking Force and Elongation at Breaking Force-Strip Method
GB/T 3920 Textiles-Tests for Color Fastness-Color Fastness to Rubbing (Eqv ISO 105-X12)
GB/T 3921.3 Textiles-Tests for Color Fastness to Washing: Test 3 (Eqv ISO 105-C03)
GB 5296.4 Instructions for Use of Products of Consumer Interest-Instructions for Use of Textiles and Apparel
GB/T 8170 Rules for Rounding off of Numberical Values
GB/T 8427-1998 Textiles-Tests for Color Fastness Color Fastness to Artificial Light: Xenon Arc Fading Lamp Test (Eqv ISO 105-B02)
GB/T 8630 Textiles-Determination of Dimensional Change in Washing and Drying (ISO 5077, MOD)
FZ/T 01053 Textiles-Identification of Fiber Content
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Sampling
6 Test Methods
7 Inspection Rules
8 Mark and Package
Appendix A (normative) Determination of the Blanket Appearance Defect
