1 Scope
This standard specifies the calculating methods of technical and economical indexes for thermal power plant.
This standard is applicable to the statistical calculation and evaluation of technical and economical indexes for thermal power plant.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 2589-2008 General Principles for Calculation of the Comprehensive Energy Consumption
GB/T 10184 Performance Test Code for Utility Boiler
GB/T 8117.1-2008 Rules for Steam Turbine Thermal Acceptance Tests - Part 1: Method A - High Accuracy for Large Condensing Steam Turbines
DL/T 467 Performance Test for Pulverizers and Pulverizing Systems of Power Station
DL/T 964 Performance Test Code for Circulating Fluidized Bed Boiler
3Technical and Economical Indexes for Fuel
3.1Fuel amount of receiving
The fuel amount of receiving refers to the amount of fuel (fuel coal, fuel oil, fuel gas, etc.) actually received by the thermal power plant from the supplier.
Foreword i
1 Scope
2 Normative References
3 Technical and Economical Indexes for Fuel
4 Technical and Economical Indexes for Boiler
5 Technical and Economical Indexes for Boiler Accessories
6 Technical and Economic Indexes for Steam Turbine
7 Technical and Economical Indexes for Auxiliary Equipment of Steam Turbine
8 Technical and Economical Indexes for Gas-steam Combined Cycle
9 Comprehensive Technical and Economical Indexes
10 Other Technical and Economical Indexes
